久久国产精品波多野结衣av,国产成人精品优优av

站內搜索

新聞資訊

公司新聞行業動態

熱點

自動上料平口攪拌機多種方量可供選擇

2022-12-23

混凝土自動上料攪拌車的功能有哪些？

2022-12-19

混凝土自動拌料車移動式可自行走戶外施工

2022-12-16

自上料攪拌車企業這么多，買車的時候應該看哪方面？

2022-12-12

關于山汽

聯系人：劉老師

電話：400-879-1999

公司：山東山汽工程機械（集團）有限公司

地址：山東省萊州市206國道與308省道交叉口東南50米

自動攪拌一體機如何降低磨損率

所屬分類：公司新聞發布時間：2021-01-25 來源：http://842233.cn/ 瀏覽量：0

因為自動攪拌一體機的磨損給客戶帶來很多麻煩，不同程度的磨損，幾乎都會影響攪拌一體機的正常工作，磨損是不看避免的，但是可以減小磨損程度，要怎樣減少呢？為了減小攪拌一體機的磨損，希望用戶能認真看下面的介紹！

Because the wear of automatic mixing machine brings a lot of trouble to customers, different degrees of wear, almost will affect the normal work of mixing machine, wear is not to see to avoid, but can reduce the degree of wear, how to reduce it? In order to reduce the wear and tear of the mixer, I hope users can take a serious look at the following introduction!

是自動攪拌一體機的潤滑，需要潤滑的地方有很多，加潤滑劑的方法和量都不一樣，有時候還需要更換新的潤滑劑，而且還需要定時定量的假潤滑劑，用戶一定了解這些潤滑技術，保證攪拌機的潤滑。

The first is the lubrication of the automatic mixer. There are many places that need to be lubricated. The method and quantity of adding lubricant are different. Sometimes it is necessary to replace a new lubricant, and it also needs a fixed amount of fake lubricant. Users must understand these lubrication technologies to ensure the lubrication of the mixer.

攪拌機比較容易磨損的部位有振動篩、攪拌葉片、表面、攪拌筒，怎樣減少這些地方的磨損？振動篩磨損關鍵在與振動軸承，用戶一定要選擇高質量的軸承，潤滑裝置要合理，用戶一定要經常對軸承進行潤滑。

The parts of mixer that are easy to wear are vibrating screen, mixing blade, surface and mixing cylinder. How to reduce the wear of these parts? The key to the wear of vibrating screen lies in the vibration bearing. The user must choose high-quality bearing, the lubrication device must be reasonable, and the user must often lubricate the bearing.

由于攪拌葉片需要攪拌混凝土，所以一般磨損比較嚴重，這就需要用戶在加物料時注意盡量避免大塊硬物體或者鋼絲等物體方法攪拌筒內，并經常對攪拌葉片進行檢修。

As the mixing blade needs to mix concrete, it is generally worn seriously, which requires the user to pay attention to avoid large hard objects or steel wire and other objects when adding materials. In addition, the mixing blade is often repaired.

自動攪拌一體機表面被磨損的可能原因有微震、滑動、沖擊、擦傷、生銹等，這就需要用戶在使用時注意，避免碰撞，并保持表面的干凈，發現生銹時要及時處理；攪拌筒也經常磨損，這就需要用戶當工作結束后馬上清理攪拌A筒，防止混凝土在攪拌筒內凝固。

The possible reasons for the surface wear of the automatic mixing machine include micro shock, sliding, impact, abrasion, rust, etc., which requires the user to pay attention to avoid collision, keep the surface clean, and deal with the rust in time; the mixing cylinder is often worn, which requires the user to clean the mixing cylinder a immediately after the end of the work to prevent the concrete from solidifying in the mixing cylinder.

上一頁：如何避免多功能攪拌車中的電擊？下一頁：多功能攪拌車出現異常我們該如何做？

熱門產品 / HOT PRODUCT