對于自動上料攪拌一體機,發動機的使用仍然非常重要,因此在建筑中使用發動機時必須格外小心。讓我告訴您一些正確的引擎維護方法。
For the automatic feeding mixer, the use of the engine is still very important, so we must be very careful when using the engine in the building. Let me tell you some correct engine maintenance methods.
1.,用塑料薄膜覆蓋混凝土攪拌機的設備,然后用半濕毛巾覆蓋薄膜的頂部,以防止高壓水流入分配器,從而難以啟動。混合器。
1. First, cover the equipment of the concrete mixer with plastic film, and then cover the top of the film with a semi wet towel to prevent high-pressure water from flowing into the distributor, making it difficult to start. Mixer.
2.用高壓水槍從頂部到底部自動上料攪拌一體機側面的污垢。
2. Use a high-pressure water gun to remove the dirt on the side of the automatic feeding mixer from the top to the bottom.
3.在濕式攪拌機發動機和機艙周圍均勻直接地噴灑混凝土攪拌機發動機外部清潔劑。
3. Spray the external cleaner of concrete mixer engine evenly and directly around the wet mixer engine and engine room.
4.沖洗3分鐘后,使用纖維刷清潔可能到達發動機艙的所有部件。
4. After washing for 3 minutes, use a fiber brush to clean all parts that may reach the engine compartment.
5.用高壓水槍快速洗去污垢。
5. Use a high-pressure water gun to quickly wash away the dirt.
6.接下來,在發動機表面上噴涂自動上料攪拌一體機發動機的外部清潔劑。操作步驟與上述相同。該循環一直進行到清潔混凝土攪拌機發動機的外部為止。
6. Next, spray the external cleaner of the automatic feeding mixer engine on the engine surface. The operation steps are the same as above. This cycle continues until the outside of the concrete mixer engine is cleaned.
自動上料攪拌一體機設備在正常使用期間通常在3個位置使用,在維護期間通常在7個位置使用。只有這樣,才能長時間保持攪拌機設備的各種運行性能。有必要對混合機設備發動機的保養知識有詳細的了解,并在實際操作中根據正確的操作方法進行合理的保養。
The automatic feeding mixing machine is usually used in 3 positions during normal use and 7 positions during maintenance. Only in this way, can we keep all kinds of operation performance of mixer equipment for a long time. It is necessary to have a detailed understanding of the maintenance knowledge of mixer equipment engine, and carry out reasonable maintenance according to the correct operation method in actual operation.